Quantcast
Channel: Notebook Boot and Lockup topics
Viewing all 63104 articles
Browse latest View live

SSD freezing, PC locks up

$
0
0

PC locks up randomly and only a power cycle (long press power button and restart) can help.

 

The issue is always the SSD - Samsung 512GB - MZVLB512HAJQ-000H1.

 

When frozen, TaskManager shows the SSD as 100% active with no throughput.

 

Things I have tried (ZERO - no faults in any of the diagnostic tests):

1. Full Windows and HP update (All patches)

2. Full system refresh using the recovery partition.

3. Full Hardware diagnostics including extended tests on RAM and SSD

4. Repeated CHKDSK and SFC /scannow

5. Uninstalling Graphics driver to isolate issue

 

Samsung support won't help as PM981 is an OEM drive.

HP has no drivers even though the only [Solved] threads on the web for people in similar situation (100% SSD active, no throughput) are where people have replaced MS drivers with Intel/ appropriate drivers.

 

Am at wit's end. This is an expensive well built machine that HP is hell bent on getting a bad name for.

 


BIOS Option: Boot converter ???

$
0
0

In the setting about build-in-devices (Webcam, BT, WiFi,...) there is also a setting" Boost Converter". What is this and what do I might need it for?

More general asking: Is there a manual describing options in BIOS? Some are self-explaining, but others not.

Thank you

Bios password

atikmdag.sys Bluescreen of Death (BSOD) driver_irql_not_less_or_equal

$
0
0

I have been experiencing the BSOD randomly caused by the same problem. 

Error Message and Details: 

What Failed: atikmdag.sys

Stop code: driver_irql_not_less_or_equal 

 

In the Event Log, this were the Administrative Events around the time the BSOD occurred:

Level: Error: Hypervisor launch failed; Either VMX not present or not enabled in BIOS.

Level: Error The virtualization-based security enablement policy check at phase 0 failed with status: Virtual Secure Mode (VSM) is not initialized. The hypervisor or VSM may not be present or enabled.

Level: Critical The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly.

Level: Error Audit events have been dropped by the transport.  0

Level: Error The hvservice service failed to start due to the following error:
Element not found.

Level: Error: The HvHost service depends on the hvservice service which failed to start because of the following error:
Element not found.

Level: Error The CmService service depends on the HvHost service which failed to start because of the following error:
The dependency service or group failed to start.

Level: Error Session "Muroc System Trace" failed to start with the following error: 0xC0000035

Level: Error 

Application: IntelAudioService.exe
Framework Version: v4.0.30319
Description: The process was terminated due to an unhandled exception.
Exception Info: System.NullReferenceException
Level Error: The computer has rebooted from a bugcheck.  The bugcheck was: 0x000000d1 (0x0000000000000030, 0x0000000000000005, 0x0000000000000000, 0xfffff8045413f419). A dump was saved in: C:\WINDOWS\MEMORY.DMP. Report Id: 759e7fea-e374-47ce-96f6-9f700570fb09.
_____________________________________________________________________________
Level: Error Faulting application name: IntelAudioService.exe, version: 1.0.152.0, time stamp: 0x5bd0d480
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0x00007fff86da1aae
Faulting process id: 0x1494
Faulting application start time: 0x01d5e9c45b025cf6
Faulting application path: C:\WINDOWS\system32\cAVS\Intel(R) Audio Service\IntelAudioService.exe
Faulting module path: unknown
Report Id: fc8ba39f-71e5-4b32-9669-578421b024d5
Faulting package full name:
Faulting package-relative application ID:

_______________________________________________________________________________

Level: Error 

ESIF(8.5.10103.7263) TYPE: ERROR MODULE: DPTF TIME 11492 ms
DPTF Build Version:  8.5.10103.7263
DPTF Build Date:  Dec 12 2018 18:51:29
Source File:  ..\..\..\..\Sources\Policies\PolicyLib\PolicyBase.cpp @ line 1248
Executing Function:  PolicyBase::sendOscRequest
Message:  Power Boss Policy: Failed to set _OSC: Failure during execution of _OSC:
DPTF Build Version:  8.5.10103.7263
DPTF Build Date:  Dec 12 2018 18:51:29
Source File:  ..\..\..\Sources\Manager\EsifServices.cpp @ line 699
Executing Function:  EsifServices::primitiveExecuteSet
Message:  Error returned from ESIF services interface function call
Participant:  NoParticipant
Domain:  NoDomain
ESIF Primitive:  SET_OPERATING_SYSTEM_CAPABILITIES [93]
ESIF Instance:  255
ESIF Return Code:  ESIF_E_ACPI_EVAL_FAILURE [1105]

Policy:  Power Boss Policy [2]

_______________________________________________________-

 

 

 

 

 

The following are errors with the Level of Warning.

1. The driver \Driver\WudfRd failed to load for the device ROOT\WindowsHelloFaceSoftwareDriver\0000.

2. The driver \Driver\WudfRd failed to load for the device PCI\VEN_8086&DEV_1903&SUBSYS_83BB103C&REV_05\3&11583659&2&20.

3. The driver \Driver\WudfRd failed to load for the device ACPI\SYNA8003\1.

4.The driver \Driver\WudfRd failed to load for the device {DD8E82AE-334B-49A2-AEAE-AEB0FD5C40DD}\DetectionVerification\5&251c1bcb&0&0.

5. The driver \Driver\WudfRd failed to load for the device HID\Vid_8087&Pid_0AC2\6&35ec4aef&0&0000.

6. The driver \Driver\WudfRd failed to load for the device HID\Vid_8087&Pid_0AC2\6&d0b318d&0&0000.

7. The driver \Driver\WudfRd failed to load for the device HID\Vid_8087&Pid_0AC2\6&1fc4e232&0&0000.

8.The driver \Driver\WudfRd failed to load for the device HID\Vid_8087&Pid_0AC3\6&2a1ac9bd&0&0000.

9. The Network List Manager reports no connectivity to the internet.

10. A connection to the Windows Update service could not be established.

11. A connection to the Windows Metadata and Internet Services (WMIS) could not be established.

12. NtpClient was unable to set a manual peer to use as a time source because of DNS resolution error on 'time.windows.com,0x9'. NtpClient will try again in 15 minutes and double the reattempt interval thereafter. The error was: No such host is known. (0x80072AF9)

13. The application-specific permission settings do not grant Local Activation permission for the COM Server application with CLSID
{6B3B8D23-FA8D-40B9-8DBD-B950333E2C52}
 and APPID
{4839DDB7-58C2-48F5-8283-E1D1807D0D7D}
 to the user NT AUTHORITY\LOCAL SERVICE SID (S-1-5-19) from address LocalHost (Using LRPC) running in the application container Unavailable SID (Unavailable). This security permission can be modified using the Component Services administrative tool.

14. Windows Hello for Business provisioning will not be launched.
Device is AAD joined ( AADJ or DJ++ 😞 Not Tested
User has logged on with AAD credentials: No
Windows Hello for Business policy is enabled: Not Tested
Windows Hello for Business post-logon provisioning is enabled: Not Tested
Local computer meets Windows hello for business hardware requirements: Not Tested
User is not connected to the machine via Remote Desktop: Yes
User certificate for on premise auth policy is enabled: Not Tested
Machine is governed by none policy.
See https://go.microsoft.com/fwlink/?linkid=832647 for more details.

 

 

I have updated all drivers and software. I have also run HP Diagnostic tools yet it did not find anything wrong. Please help me fix this issue, I am tired of search for a solution and ready to just sell the laptop and buy a Dell. 

 

 

After research this issue, it appears this problem is related to my graphics card. 

Graphics Card: AMD radeon rx vega m gl graphics

Probook 640 G1 Windows 7: Advanced Boot Options keyboard is disabled

$
0
0

Hello,

 Ever since I've had this Probook 640 G1 laptop my keyboard has been disabled in the Advanced Boot Options screen.

Never really bothered me too much because there was a countdown to "Start Windows Normally". Now I purposely came to this screen because I need to start in "Safe Mode".

 I have not had any problems with the keyboard anywhere else- but it's always been completely disabled in this screen.

 

 Can anyone help me to enable the keyboard in this screen?

thanks,

Jim

My laptop will not open, just black only

$
0
0

My sister just bought my laptop this December. My problem is that it will not open now. Just black on screen 😭

15824658165927842412728530177709.jpg

BIOS Option: Boost converter ???

$
0
0

In the setting about build-in-devices (Webcam, BT, WiFi,...) there is also a setting" Boost Converter". What is this and what do I might need it for?

More general asking: Is there a manual describing options in BIOS? Some are self-explaining, but others not.

Thank you

Hp Laptop wont start up all of a sudden

$
0
0

I have a HP Notebook 15-f113ca

serial number [edited]

Product number LOT23AU#ABL

 

It died all of a sudden and won't start up any more

I have tried a hard restart.

It won't start up with or without the battery.

When I plug in the power supply the white light beside the plug lights up

When I press the power button an orange light on the F12 key lights up and the caps lock white light flashes slow and continuous. No short flashes.

It will not light up without the power supply, but it will stay flashing with the battery in after I unplug the power supply. It will not light up with just the battery.

I can not hear any fan starting up or hard drive spinning.

Nothing is displayed on the screen at any time.

 

What is most likely wrong with it and is it worth trying to fix?

 

I removed the hard drive to test it out. The hard drive appears to be intact...

 


POWER BUTTON NOT WORKING

$
0
0

HEY, MY POWER BUTTON IS NOT WORKING ON MY LAPTOP SO HOW CAN I FIX THIS PROBLEM. NO LIGHT INDICATOR IS SHOWING UP. WHEN I PRESS MY POWER BUTTON NOTHING HAPPENS AT ALL AND PLZ REPLY ME AS SOON AS POSSIBLE SO I CAN FIX MY LAPTOP .

 

Administrator Password Forgotten - BIOS Key 87159692

$
0
0

When I hit the power button on my G62-227CL I got a screen requesting me Administrator or Boot Password. My BIOS key is 87159692. Anyone can help me?

 

Thanks

Hp specter wont turn on and wont charge

$
0
0

On sunday night I used the laptop and then left it on charge that night. Tuesday afternoon I went to use it to find the battery flat. Think I must not have plugged it in properly I teyed the cords, all plunger in. Tested the plug socket and that works. But the laptop it not turning on (just giving the quick few flashes at the power cord socket to show it's out of power) and pluging it in wont start the charging.

 

Is this completely stuffed or is their a simple fix to this?

Hp stream 14 administrator password Bios Password reset Hp 14-ax010wm is locked

$
0
0

Hp stream Hp 14-ax010wm is locked with an administrator password (Power on Password ) that I never set. Please help me. it gives me a code of [ i 77674980 ]

Any help would be appreciated

My password login screen is missing

$
0
0

I can not enter my password. I tried lot many things explained on internet help forums to get my password entering screen. I don't remember much but during that process somewhere it was written Boot device not found. Please install an operating system on your hard disc. My account photo is appearing, but the password field does not appear and I have no login options Please help.

HP Elitebook 840 G6 - HardwareDiagnostics-Webcam- Failure ID

$
0
0

Hello,

This is regarding an issue with Webcam. In device manager , webcam devices appear as "USB boot". we have done all required drivers update including camera driver, BIOS, Chipset drivers etc., Deleted USB controller and performed "scan for new hardware change". It is still showing as "USB boot".

 

When we run hardware diagnostics on webcam connection, there is a failure id reported " 94SL24-A1DA1K-MFGKHA-Q3BY03".

Could you brief the what it indicates and remedy for the same?  In our department, we have seen around 6 devices of same model reporting Webcam as "USB boot".

 

camera_20200220_084013.jpg

Blue screen

$
0
0

Im in a blue screen, i see the command prompt, filmware settings, delete updates. And more. I want to quit this and go back to windows.


Looking for solution

$
0
0

Hi.I have problem with HP ENVY - 13-AD127TX. 

The CMOS checksum is invalid.
The CMOS will be reset to the default configuration and will be rebooted.
Please check your BIOS Setup options to see if they changed.
CMOS Reset (502)
ENTER - Reboot the system

Can somebody help me to fix it?. I already replace the motherboard , after checking the motherboard and top cover,there is no CMOS battery.

Enable NumLock key on bootup on HP Elitebook

$
0
0

I am trying to find how to enable num lock to be on on start up.

 

Looking at an older thread, I saw the following recommendation:

 

Step 1. Press Win + R and type in Regedit
Step 2. Navigate to registry key HKEY_USERS\Default\Control Panel\Keyboard
Step 3. Right click on the “InitialKeyboardIndicators”, select Modify and change Value data to 2.
Step 4. Save and exit Registry.

 

I tried changing the default value from 2147483648 to 2147483650
I also tried changing the default value from 2147483648 to 2

 

In both cases, I received the same error message:  Cannot edit InitialKeyboardIndicators: Error writing the value's new contents.

 

Any ideas on a solution?

Admin password demanding

$
0
0

My laptop has been asking for admin password which I have no idea or setup any password on it

my laptop wont turn and boot up, it is just like it is dead, there is no activities no sound orlight

$
0
0

my laptop wont turn and boot up, it is just like it is dead, there is no activities no sound or light

I press power bottom but nothing happen

bios password reset i 55322767

$
0
0

need help removing bios password.

 

halt code is  i 55322767  tried  bios-pw.org but none of those codes work

 
Viewing all 63104 articles
Browse latest View live


<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>