Quantcast
Channel: Notebook Boot and Lockup topics
Viewing all 58360 articles
Browse latest View live

Computer turns on gets to come screen and shuts off

$
0
0
So recently when I turn my computer on it starts to load Windows and then will shut off. Each time the computer turns on it loads a little further so it'll get to my login screen shut off it restarts itself reloads and then it'll get to the home screen shut off and restart itself. On rare occasion it will load to where I can use it and it just randomly shuts off, but then it restarts itself.

I have an go laptop model # 5CD6216p3H

$
0
0
I was using my laptopand it went to blue screen, I'vedone some reading and didfind error code 0x0000098 and found my boot configuration data file is messed up? I don't have recovery tools, and was hoping someone could tell me how to fix this issue.
I would also like to factory reset if possible to fix this problem

cmos checksum error and power on problem

$
0
0

Hi i have forgotten my bios password and now i cant boot from usb. Havent needed to use it a long time and uups just cant remeber it. Can you please help me.!!

My screen is stuck on setup starting.. i done enable legacy support also but i cant go further....

Re: Bios password

$
0
0
David I need your help! I've been scouring the forums looking for a solution and tried bios pw website and can't get bios unlocked. Tried taking cmos battery out and it just said bios would be reset to default and reboot system. My disabled system code is
[i 52277533] and it's a hp notebook but not a mini I don't believe. It win 10 dont know if its 32 or 64 bit.

Model 14am052nr

Update Bios and installing SSD! HELP MEEE!!!

$
0
0

I'm not speack english, i write in italian and traslation of google-traslation.


Buongiorno, ho un problema con il mio portatile HP DV5 1204em, in pratica dovrei mettere un SSD su questo portatile, ma il BIOS non mi permette di impostare nulla, quindi ho provato ad aggiornare il BIOS da f.35 ad F.38, anche se risulta l'installazione andata a buon fine, quando accedo al bios risulta SEMPRE F.35 come se non avesse aggiornato! Ma nelle impostazioni del pc risulta invece AGGIORNATO. Come posso fare?? Possibile che non possa in alcun modo installare SSD?

Ho windows 7 installato

 

Traduzione:

Hello, I have a problem with my laptop HP DV5 1204em, in practice I should put an SSD on this laptop, but the BIOS is not allowed to set anything, so I tried to update the BIOS from f.35 to F.38, even if the installation results will be a good end, when I access the bios it is ALWAYS F.35 as if I had NOT updated! But in the PC settings it is instead UPDATED. Come to the rate ?? Possible that it can not in any way install SSD?

Can't boot my notebook

$
0
0

Hi, I was playing some games and watching some videos until my whole laptop suddenly froze. I gave it around half an hour and nothing would turn on. So I turned it off and on and got told that something was wrong with the hard disk drive. I looked up videos to fix this (resetting the BIOS settings and disabling legacy) but I kept getting the same message. I looked inside the laptop to see that nothing was wrong, but when I did a system check, I knew 100% it was the hard drive. That is what redirected me to this page. Please can you help me fix my laptop.

 

 

-many regards, Thomas Bond

Hp touchsmart won't power up

$
0
0
I have a hp touchsmart. I had lost the charger and hadnt used for awhile. Just got another charger. When plugged up white light illuminates beside charging port, but will not charge battery or power computer. No lights come on at all. It was working fine the last time I used it. Trying to decide if it is the battery.

reset bios password

$
0
0

Helloneed to reset bios password.Model: Hp ProBook 4540s

PRODUCT: C5E13ES#ABV

Reset Bios admin password

$
0
0
System disabled [ 77924541 ]

What code can I enter here, please?

Forgot BIOS password, can't boot (68242752)

$
0
0

I can't boot up my hp pavilion 15 because I forgot my BIOS bootup password, what can I do? Thanks for help.

How to Overclock an AMD CPU using BIOS

$
0
0

Hi! I heard about oveclocking your GPU and CPU using ADVANCED BIOS Settings, so I'm wondering how can I access the Advanced BIOS SETTINGS and how to Overclock my CPU and GPU. Thanks!

Information About my system :

HP Note 3f0 error (Boot device not found) then bootup subsequently.

$
0
0

Problem:

Upon 3rd-4th startup, Notebook stucks on HP logo and keyboard light blinks for 6-7 times and black screen comes up with message "Boot device not found", upon pressing f2 , system diagnose open up and without doing anything (I repeat without doing anything) I exit and Windows starts up normally. This problem started since when I have installed Transcend 120gb SSD.

I request experts to please watch this video, to understand my problem: https://www.youtube.com/watch?v=t2WPOd3zY8M

 

Things I have already done:

1.Checked SSD's health and performance by installing Transcend Scope software, and everything seems great. Here are pics:

1.png2.png3.png

 

2. Legacy mode is enabled.

3. Reseated the SSD.

4. Restored BIOS setting to factory.

 

Please help.

New laptop with expired warranty?

$
0
0

Hi,

 

I just bought a brand new, non refurbished but previous generation SPectre x2 (model number N5S21UA#ABA) from Amazon which arrived yesterday. Upon first start it had a cmos error, it booted on the second attempt but the HP Support Assistant says that the warranty has expired. The first Windows update took 5 hours before hanging at 99%. This morning it failed to install 2 out of 3 HP Support Assistant updates  (Intel ME and Realsense camera) repeatedly and completely failed with Windows Updates, freezing numerous times.

 

I have to say that this is all rather frustrating. I havent even used the latop and yet the warranty has expired? That would be bad enough but the update issues  just compound my frustations. It's a shame as I really want to be able to use the Spectre x2, it's beautiful, has a great screen, a fantastic keyboard etc but these issues are going to sour my opinion of HP and cause me to return the X2 and buy from a different manufacturer unless the situation is resolved.

Settings is frozen

$
0
0
I am unable to change my wireless connection but every time I pull up settings, a solid blue sceen with a nut in the middle of the page comes up. Nothing else happens. What is going on?! It is keeping me from being able to do anything else on my computer. I have only had this computer for a short time & used it minimally. I'm very disappointed.

Notebook suddenly stopped working, diags?

$
0
0

Screen suddenly went black. "Power" light is on. Charging light does not come on when charger is plugged in/switched on. There's about 20V at the charger's barrel connector. Have removed & replaced battery, re-seated memory, plugged in old spinning disk (pre-SSD, see other thread) and thought bad thoughts about the thing.

 

Any idea what further diagnostics might help, please, or what's wrong with it?

 

 

Regards,

Laptop will not startup

$
0
0
Laptop will not start up. It seems to be stuck on a constant loop, I get the hp logo then a black screen with a message saying attempting to recover installation/restoring previous version of Windows. I get an error code of 0xc000000f when I enter the system recovery, but i dont have a recovery disc. Any ideas?

boot password reset for hp pavilion 15-cc100tx

$
0
0
i forgot boot password for hp pavilion 15-cc100tx.the system disabled code changes every time and start with i followed by a space and numbers like [i 12345678].

Frozen on "Preparing Automatic Repair"

$
0
0

Bought my hp laptop on Black Friday so only 3 months ago, has had little use and yesterday a notice shot up on the screen while I was on the computer saying an an error was detected so the computer was going to be automatically restarted, which it did and the screen came up with the hp logo with Preparing Automatic Restart. Nothing happened.  I did a force shut down and the same thing happened.  At a loss of what to do.

Static discharge locks up HP ENVY laptop keyboard input.

$
0
0

I have an HP ENVY laptop - Windows 10 Pro 64-bit, Intel Core i7-6500U CPU @ 2.50GHz, 816D (U3E1) Motherboard, Jan 2016 Born on Date, that has been in for HP warranty service twice for a keyboard lockup issue after which the Caps Lock light blinks 5 times (system board requires service). HP said they replaced the mobo during the second repair.

Six months later and out of warranty, it is now doing the same thing for a third time.

I think I have narrowed the cause down to static discharge. I am a professional "behind the curtain" tech director and PPT guy for large corporate shows. I have two of these computers (same exact models and mobos) side my side along with a ROC ASUS next to my on-air switcher. Anyone, not just me, can walk up to this computer and lock it up with a static discharge.

The same type of discharge does not affect the other two computers whether I'm in a convention center ballroom on carpet sitting at a table or in my office at a wooden desk on a hardwood floor.

Because the screen flickers during the static discharge, I first tried disabling the nVideo gfx chip then the Intel gfx chip and of course did mem tests and hd tests. I also installed new OS. No positive results.

If I approach the laptop and create a static spark as I touch the palm rest or screen bezel the keyboard locks up EVERY time.
The touch pad still works.
A blue tooth mouse still works.
I have even tested a blue tooth keyboard. It even worked after the lockup.
The laptop keyboard accepts no key presses.

The static discharge required to freeze this computer is not big. It's not a "oh my gosh that spark hurt" type of discharge from my finger.

Also, both HP ENVY computers have polished metal cases not plastic ones.

Besides wearing a grounding strap on my wrist when using this laptop does anyone have an idea how I can fix this issue?

Thanks for any suggestions.

Viewing all 58360 articles
Browse latest View live


Latest Images