Hi, I usually close my laptop hoping that is going to go on Hibernate state and I can resume later.
I have been noticing that it seems that it goes to Sleep mode, but my battery is always draining :/ any ideas?
No USB devices plugged and I also tried to optimize power settings, no device is allowed to wake the computer, but still not sure how to sort this out.
This are the errors of the Powercfg -energy command.
Thanks!
Analysis Results Errors
Power Policy:USB Selective Suspend is disabled (On Battery)
The current power policy has globally disabled USB selective suspend.
USB Suspend:USB Device not Entering Selective Suspend
This device did not enter the USB Selective Suspend state. Processor power management may be prevented when this USB device is not in the Selective Suspend state. Note that this issue will not prevent the system from sleeping.
Device Name Validity Sensors (WBF) (PID=0050)
Host Controller ID PCI\VEN_8086&DEV_8C31
Host Controller Location PCI bus 0, device 20, function 0
Device ID USB\VID_138A&PID_0050
Port Path 14
CPU Utilization![:smileytongue:]( "Smiley Tongue")
rocessor utilization is high
rocessor utilization is highThe average processor utilization during the trace was high. The system will consume less power when the average processor utilization is very low. Review processor utilization for individual processes to determine which applications and services contribute the most to total processor utilization.
Average Utilization (%) 5.52Platform Power Management Capabilities![:smileytongue:]( "Smiley Tongue")
CI Express Active-State Power Management (ASPM) Disabled
CI Express Active-State Power Management (ASPM) DisabledPCI Express Active-State Power Management (ASPM) has been disabled due to a known incompatibility with the hardware in this computer.